-5-
(2) Move the charge relief valve hose to the
bottom port on the air cleaner box and plug
the top port with provided rubber plug
‹№4› as shown.
(3) Mount the GReddy Blow Off Valve‹№1›
and bracket‹№3› to the adapter‹№2›
using the provided gasket‹№5› and bolts
‹№7› as shown.
(4) Stick the emblem‹№6› to the top housing.
(5) Cut the factory air bypass valve hose on
both ends as shown, and reinstall it back to
the compression pipe using the factory
hose.
● Cut 20㎜ off from the Compression
pipe end.
● Cut 10㎜ off from the blow off valve
side.
‹№3›
‹№5›
Charge relief valve hose
‹№4›
Compression Pipe end
Blow off valve end
10
Comentários a estes Manuais