Greddy TURBO RELATED: Mazda RX7 1993-96 / BOV Kit BRS-503 Manual do Utilizador descarregar pdf (Página 6)

－6－

(6) Remove the lower bolt from the factory

relay bracket and mount the blow off valve

assembly as shown with provided blots

<NO.7>.

(7) Connect the air bypass hose to the blow

off valve adapter using the factory hose

clam as shown.

(8) Connect the factory air bypass valve

vacuum hose to the top of the blow off

valve.

(1) Inspect the installation. Reconnect the negative terminal of the battery and start the engine.

(2) Check and make sure that there no air leeks, clearance problems or irregular sound.

(3) Lightly rev up the engine couple times to check if the blow off valve is operating.

If irregular idle or engine stall occurs, loosen the M6 lock nut and turn the adjustment screw to

HARD

HARDHARD

HARD until the problem is eliminated.

After the adjustment, tighten the lock nut to secure the setting.

※ The adjustment is preset to the softest position form factory. Do not turn it further out that

this position.

※ Make sure to loosen the lock nut before making adjustment. Turning the adjusting screw

without loosening the lock nut will strip out the top housing.

※ When the adjustment screw is turned in, the stock of the valve decreases. Screwing it in too

far will affect the proper operation of the valve.

When venting the outlet to the atmosphere, depending on the application, the airflow meter

voltage can drop enough to stall the vehicle when the blow off valve is discharged.

If adjustment of the top screw cannot prevent the engine stall, install e-Manage system and use

the Anti Engine Stall feature or reroute the discharge outlet back into the intake system after

the airflow meter.

If the engine stalls while operating the vehicle, the steering and the

Brakes will not operate properly and can be very dangerous.

Warning

WarningWarning

Warning

Adjustment after

Adjustment after Adjustment after

Adjustment after installation

installationinstallation

installation

Starting the engine

Starting the engineStarting the engine

Starting the engine

Vacuum hose

Relay bracket

Air bypass hose

1 2 3 4 5 6 7

How to change the Attachment 7

Comentários a estes Manuais

Sem comentários

Greddy TURBO RELATED: Mazda RX7 1993-96 / BOV Kit BRS-503 Manual do Utilizador Página 6

Comentários a estes Manuais

Manuais e produtos relacionados com Para o carro Greddy TURBO RELATED: Mazda RX7 1993-96 / BOV Kit BRS-503